







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lake Forest Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Lake Forest, CA, installing and remodeling KraftMaid cabinetry across the full product line, from stock to premium series. What sets our KraftMaid work apart is that we focus on the real-world failures these cabinets develop, drawer glides, hinges, water-damaged boxes, sagging shelves, instead of on selling you a particular line. Construction Lake Forest is an independent KraftMaid service provider. We are not affiliated with, authorized by, or a dealer for KraftMaid, and we say that plainly because it matters when you’re choosing who works in your kitchen.
What We Actually Do With KraftMaid in Lake Forest
Most of the KraftMaid work we handle in Lake Forest is not new construction. It’s replacement and repair inside 1970s and 1980s tract homes where the original kitchen was gutted years ago and a KraftMaid set went in, and now the hardware is tired while the boxes are still sound. We diagnose the failure, source parts that fit, and get the kitchen working again. When the boxes are past saving, we install new cabinetry and finish the job with quartz or granite counters and a backsplash that ties the room together.
Why Local Approval Matters Here
Lake Forest is a master-planned, largely built-out city, incorporated in 1991 from planned communities like Foothill Ranch and Portola Hills. Almost all construction here happens inside HOAs and established tracts, not on open land. That shapes kitchen work more than you’d expect: a remodel that changes exterior venting, window openings, or anything visible from the street can require HOA architectural review on top of city permits. We plan for that review early so your cabinet delivery and install day don’t collide with an approval you didn’t know you needed.
Why Trust Construction Lake Forest for Your KraftMaid Construction?

Our technicians have up to 8 years of experience, and a good share of that time has been spent inside KraftMaid cabinets, not just around them. That matters because KraftMaid construction problems are specific. A drawer that won’t close flush in a Vantage series cabinet is usually a roller issue, not a warped box. A door that hangs proud in a Passport or Chardonnay setup is usually hinge alignment, not a bad door. Knowing which is which saves you from replacing cabinetry you don’t need to replace.
We keep the work warranty-safe. That means we don’t drill new holes in a cabinet face to force hardware into place, we don’t cut into the box to route plumbing you should have moved, and we don’t improvise a fix that voids coverage on the rest of the unit. When we touch one part of a KraftMaid installation, the rest of it stays intact and covered.
We also bring the full-scope advantage. Because Construction Lake Forest handles kitchen remodeling, countertops, backsplashes, windows and doors, flooring-adjacent work, and the exterior envelope under one contractor relationship, your KraftMaid job doesn’t stall waiting on a second or third trade to show up. No handoffs. No finger-pointing between trades when something doesn’t line up.
To talk through your project, call (888) 397-8184. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Lake Forest
These are the failures we see most often in KraftMaid cabinetry around Lake Forest. Each one has a real cause, and each one usually has a targeted fix that costs far less than a full replacement.
- Drawer glide failure in Vantage series cabinets. The plastic rollers inside the original glides wear down with years of daily use, and the drawer starts to drag, stick, or close at an angle. The cabinet box is almost always fine. Replacing the glides with upgraded soft-close hardware and adjusting the drawer front restores smooth operation, and it’s one of the most cost-effective repairs you can make to a KraftMaid kitchen.
- Soft-close hinge malfunction in Passport and Chardonnay lines. Doors stop closing flush, drift open a quarter inch, or the soft-close mechanism stops catching and the door slams. This is hinge wear, not a door defect. Swapping in adjustable soft-close hinges and realigning the door fixes it, and it’s a repair we do often because these hinges take a lot of cycles over a decade or two.
- Cabinet box delamination or swelling near sinks and dishwashers. Inland Orange County is dry, but the moisture that matters here is local, not climatic: a slow supply-line weep, a dishwasher door that vents steam into the cabinet, a sink that’s been caulked and re-caulked without the leak behind it ever being found. Particleboard and MDF cores swell and the laminate skin lifts. Catching it early lets us dry, seal, and reinforce. Catching it late means replacing that one box, not the whole run.
- Shelf pin hole elongation and shelf sagging in wall cabinets. Heavy dishware, stacked plates, cast iron, and years of loading wear the pin holes oval and the shelf dips at the front edge. We install shelf supports that spread the load across a wider area and re-level the shelf, which keeps the cabinet usable without drilling new holes in a visible face.
- Doors out of alignment after a countertop or flooring change. A kitchen remodel that includes new counters or a raised floor changes the plane the cabinets sit on, and doors that closed perfectly before suddenly rub. Realignment is straightforward, but it needs to happen after the new surfaces are in, not before.
KraftMaid Parts & Our Repair-vs-Replace Approach

We source genuine KraftMaid replacement parts for glides, hinges, and shelf supports when they’re available, and we use high-quality aftermarket equivalents that meet or exceed OEM specifications when a part has been discontinued. We’re not a KraftMaid dealer and we don’t claim to be. We’re an independent shop that knows what fits KraftMaid cabinetry and installs it correctly.
The repair-versus-replace call is where a lot of homeowners get talked into more than they need. Our rule is simple: if the cabinet boxes are structurally sound, square, and dry, refacing or targeted hardware repair is usually the smarter spend. If the boxes have swollen, delaminated, or gone out of square, new cabinetry is the honest answer. We’ll tell you which one you’re looking at before you commit to a number.
If you’re weighing repair against replacement on a KraftMaid kitchen, call (888) 397-8184. Estimates are free, and the written estimate sets the final price.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the cabinets, check the glides, hinges, box joints, shelf pins, and the area under the sink. We identify whether the failure is hardware, box, or moisture-driven, because the fix is different for each.
- 2
Repair or install. For a hardware failure, we replace the glides or hinges with parts that fit your KraftMaid series and adjust the drawer fronts and doors. For a full install, we set the boxes level and plumb, shim to the wall, and secure them so the doors hang true from the first day.
- 3
Test. Every drawer gets cycled open and closed. Every door gets checked for flush close and soft-close engagement. We check under the sink for any moisture we didn’t cause but should flag.
- 4
Warranty-safe closeout. We document the parts used, confirm nothing we did affects your KraftMaid coverage on untouched components, and walk the kitchen with you before we leave.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Lake Forest
We service and install KraftMaid kitchen cabinetry across the full range, from stock to premium series, including the Vantage Series, Passport Series, and Chardonnay door style. We also install KraftMaid Organizers, the interior pull-outs, dividers and shelf systems that make the cabinets work harder. Beyond cabinets, we handle the surrounding scope: quartz and granite countertop installation, backsplash installation, and full kitchen remodeling that ties new cabinetry to new surfaces. We’re not limited to one line, so we recommend the KraftMaid product that fits your kitchen and budget rather than the one that’s easiest to sell.
We Also Service These Brands
Construction Lake Forest is not a single-brand contractor. We also work with Kohler fixtures, GAF roofing systems, PGT windows and doors, and Master Halco fence systems, among 50+ vetted manufacturer brands across roofing, cabinetry, countertops, fixtures, windows, doors, fencing, pavers, and ADU systems. That breadth means your KraftMaid kitchen can sit inside a whole-home plan handled by one contractor.
FAQs – KraftMaid Construction Service in Lake Forest

No. Construction Lake Forest is an independent KraftMaid service provider and is not affiliated with, authorized by, or a dealer for KraftMaid. We repair, install, and service KraftMaid cabinetry with quality parts that fit it, and we’re clear about that so you know exactly who’s doing the work.
Yes. We source genuine KraftMaid replacement parts for glides, hinges, and shelf supports when they’re available, and use high-quality aftermarket equivalents that meet or exceed OEM specifications when a part has been discontinued. We don’t stock OEM or genuine KraftMaid parts, and we don’t claim to. We source what fits and installs correctly.
Yes. Replacing just the drawer glides on KraftMaid Vantage cabinets is one of the most common repairs we do. The plastic rollers wear out long before the cabinet box does, so we swap in upgraded soft-close glides and adjust the drawer front for smooth operation. Call (888) 397-8184 for an exact quote, estimates are free.
It depends on how far the swelling has gone. Surface-level moisture can usually be dried, sealed, and reinforced, but if the particleboard core has swollen and the laminate has lifted, that one box typically needs replacing while the rest of the run stays. We’ll give you an honest read before you spend. Call (888) 397-8184 to schedule a free estimate.
We use genuine KraftMaid hinges when they’re available and high-quality aftermarket equivalents that meet or exceed OEM specifications when they’re not. Either way, we swap out the worn hinges for adjustable soft-close models and realign the doors so they close flush. Call (888) 397-8184 to book an estimate.
Cabinet installation in Lake Forest typically runs $4,000 – $13,000, a full kitchen remodel runs $14,000 – $45,000, countertop installation runs $2,000 – $6,500, and backsplash installation runs $800 – $2,500. These are estimated ranges; the written estimate sets the final price. Call (888) 397-8184 for an exact quote, estimates are free.
Yes. If the boxes are structurally sound, square, and dry, refacing is often the smarter spend, and we’ll tell you plainly when that’s the case. If the boxes have swollen or gone out of square, new cabinetry is the honest answer. Call (888) 397-8184 and we’ll help you decide.
Our work is done warranty-safe: we don’t drill new holes in cabinet faces, cut into boxes, or improvise fixes that affect coverage on untouched components. We document the parts used and confirm before we leave that the rest of your KraftMaid installation stays intact and covered.
Book Your KraftMaid Service in Lake Forest, CA
Whether your KraftMaid kitchen needs drawer glides replaced, hinges realigned, a water-damaged box repaired, or a full cabinetry installation with new quartz counters, Construction Lake Forest can handle it. Call (888) 397-8184. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
Written by the team at Construction Lake Forest.












